System information

12-423
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcip
Examples The following is example output from the show fcip command. In this example, the FCIP instance is
configured to use a raw IP connection.
[SN5428-2A]# show fcip fcip1
Instance Device I/F Network I/F
-------- ---------- --------------
fcip1 fci1 ge1 10.1.0.16
Description
-----------
Accessing SAN island 5
Destination Mode IpAddress IsConnected
----------- --------- --------------- -----------
dest1 raw 10.2.70.110 TRUE
LinkState
---------
UP
fcip1 Trace Status
------------------
pktTraceMask On, mask 0xffff
mboxTracing On
mboxCmdCount 0
fcip1 Connection Information
----------------------------
idlePingDelay 60
txAck 0x38
txSeq 0x39
rxAck 0x38
rxSeq 0x38
peerNeedsAck 0x0
WackQ 0x0, 0xca69d08
WackQCnt 0x0
WackQExtra 0x0
frOut 0x0
frOutHiWater 0x400
bcOut 0x0
bcOutHiWater 0x200000
burstOut 0x0
burstOutHiWater 0x200000
outFlowCtrlQ 0x0, 0x0
frIn 0x0
frInHiWater 0x2b0
inFlowCtrlQ 0x0, 0x0
blockMaxSize 0x0
oosPktQ 0x0, 0x0
ipProtocol 0x4
reXmitCnt 0x4
reXmitMaxTO 0x30
reXmitTimeOutIncr 0x0
reXmitInitialTimeOut 0x0
reXmitTotalTimeOut 0x0
192ms 256ms 384ms 768ms