System information

12-425
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcip
Trace Status Operational information about FCIP traces.
pktTraceMask The trace mask.
mboxTracing Indicates if tracing is turned on for the FCIP instance.
mboxCmdCount The number of commands that have been traced.
Connection Information Configuration and operational information about the FCIP
instance connection to the peer.
idlePingDelay The number of seconds before a keep-alive packet is sent across
an idle connection.
txAck The number of the last transmitted acknowledgement (ACK).
txSeq The last transmitted sequence number.
rxAck The number of the last received ACK.
rxSeq The last received sequence number.
peerNeedsAck The current number of unacknowledged frames.
WackQ The head and tail pointers of non-acknowledged packets.
WackQCnt The total number of packets waiting for ACKs.
WackQExtra The number of packets acknowledged but not returned from the
Gigabit Ethernet driver.
frOut The number of Fibre Channel (FC) frames that have been
transmitted on the Gigabit Ethernet interface, but not yet
acknowledged.
frOutHiWater The maximum number of frames that can be outstanding on a
raw IP connection.
bcOut The total number of FC octets transmitted on the Gigabit
Ethernet interface, but not yet acknowledged.
bcOutHiWater The maximum number of bytes that can be outstanding on a raw
IP connection.
burstOut The number of bytes given to the Gigabit Ethernet interface, but
not returned.
burstOutHiWater The maximum number of bytes that can be transmitted on a raw
IP connection.
outFlowCtrlQ The head and tail pointers of queued packets waiting on Gigabit
Ethernet transmit flow control.
frIn The number of FC frames given to the FC interface.
frInHiWater The maximum number of frames, received from a raw IP
connection, that can be sent to the FC interface.
inFlowCtrlQ The head and tail pointers of queued packets waiting on FC
transmit flow control.
blockMaxSize The maximum block size, if blocking FC frames.
oosPktQ The head and tail pointers of packets received out-of-sequence,
waiting for in- sequence packets.
Table 12-27 Description of Fields in the “show fcip” Command Output (continued)
Field Description