System information

12-426
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcip
The following is example output from the show fcip brief command:
[SN5428-2A]# show fcip fcip1 brief
Instance Device I/F Network I/F
-------- ---------- --------------
fcip1 fci1 ge1 10.1.0.16
Description
-----------
Accessing SAN island 5
Destination Mode IpAddress IsConnected
----------- --------- --------------- -----------
dest1 tcpclient 10.2.70.110 TRUE
LinkState
---------
UP
ipProtocol The value of the IP protocol used in the IP header.
reXmitCnt The maximum number of times a packet can be retransmitted,
before it is discarded.
reXmitMaxTO The maximum amount of time, in ticks, that can be used for any
one retransmission, before the packet is discarded.
reXmitTimeOutIncr The amount of time, in ticks, to add to a packet's time out value
before retransmitting the packet
reXmitInitialTimeOut The initial amount of time, in ticks, to delay before
retransmitting a packet.
reXmitTotalTimeOut The maximum amount of time, in ticks, that a packet is kept
alive, before it is discarded.
Millisecond values The retransmission intervals, based on the error recovery
algorithm.
tcpPort The TCP port number. The TCP server listens to this port; the
TCP client connects to this port.
rxTcpWindowSize The current maximum number of outstanding bytes that can be
received on a TCP connection.
maxRxTcpWindowSize The configured maximum number of outstanding bytes that can
be received on a TCP connection.
txTcpWindowSize The configured maximum number of outstanding bytes that can
be transmitted on a TCP connection.
txTcpCongestionWindowSize The size of the congestion controlled window, in bytes.
maxTxTcpWindowSize The current maximum number of outstanding bytes that can be
transmitted on a TCP connection. This is the largest window that
the peer has offered.
Table 12-27 Description of Fields in the “show fcip” Command Output (continued)
Field Description