System information

12-446
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show interface
show interface
To display operational characteristics and statistics for interfaces configured for the SN 5428-2 Storage
Router, use the show interface command. Statistics are cumulative since the last time the system was
started.
show interface
show interface brief [expression]
show interface {if-name | all} [stats]
show interface if-name iscsilogins
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines
• Use the show interface command with no parameters to display the basic operational characteristics
and configuration data for all interfaces.
• Use the show interface brief command to display basic operational characteristics for each of the
interfaces. This display includes status (up or down) information for the interface and selected
operational options such as type of interface, MTU size, and speed. Use the expression argument to
limit the display to options that match the expression.
brief Show basic operational characteristics for all interfaces, including status, IP
address, and selected options.
expression (Optional) Limit the display to selected options that matches this
expression.
if-name Show basic operational characteristics and configuration data for the
specified interface. Valid interface names are listed in Table 12-31.
all Display operational and configuration data for all interfaces.
stats (Optional) Show operational statistics, such as number of input and output
packets, for the specified interface.
iscsilogins Show iSCSI host logins for the specified interface. This keyword is only
valid when the storage router is deployed for transparent SCSI routing.
Release Modification
3.2.1 This command was introduced.