System information

12-470
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show runningconfig
Examples The following is an example of output from the show runningconfig command, for a storage router
deployed for SCSI routing:
[SN5428-2A]# show runningconfig
!
! CLUSTER
!
! cluster Lab1
!
! ACCESSLIST
FCIP FCIP instance configuration information.
FC PORTS Operational characteristics of the Fibre Channel interfaces.
FC SWITCH Global Fibre Channel attributes.
FC ZONE Zone configuration information.
FC ZONE ALIAS Zone alias configuration information.
FC ZONE SET Zone set configuration information.
GE IP addresses and operational characteristics of the Gigabit Ethernet
interfaces.
HA HA configuration information.
HA Port IP address and operational characteristics of the HA interface.
LOGGING ROUTE
FACILITY
The logging table.
Mgmt Port IP address and operational characteristics of the management interface.
MONITOR LOGIN The Monitor mode password.
RESTRICT Storage router interface restrictions.
RIP Routing Information Protocol (RIP) configuration information.
SCSIROUTER Configuration information for each SCSI routing instance, including
name, description, server interface and other instance-specific
configuration information.
SNMP The SNMP settings.
SNTP Date and time information, including the address of any associated NTP
server.
SOFTWARE The default download location for storage router software.
SSH Secure Shell (SSH) configuration information.
SYSLOG Remote logging configuration information.
SYSTEM SN 5428-2 Storage Router name.
TELNET Session timeout information.
VLAN VLAN configuration information.
VTP DOMAIN VTP domain name.
VTP MODE VTP configuration mode.
Table 12-34 Elements Displayed for the show runningconfig Command (continued)
Element Description