Installation Guide

2
Wall Mount Hardware Setup
The MT12 has multiple options for mounting to a surface. A mounting plate and two screws allowing it to be
mounted to a wall using screws. If necessary, two drywall anchors are included to help if the wooden stud
cannot be located. In addition to using screws, the mounting can be secured to a surface using the
provided 3M adhesive tape or round magnet sponge. Please note—When using the magnet for mounting,
the height of the device should be 2 meters or less.
Bluetooth 5.0
The MT12 features Bluetooth 5.0 which allows the device to perform over long distance with other Meraki
networking devices to monitor the environment it will be used in.
Power Options
The MT12 is powered with two AA-batteries. The expected battery life when used with this product is
estimated to be 5 years for the MT12.
Note: During first time setup, the MT12 will automatically update to the latest stable firmware.
Some features may be unavailable until this automatic update is completed. This process may
take up to 10 minutes due to enabling of whole disk encryption.