Setup guide

A-5
Cisco 6400 Software Setup Guide
OL-1183-04
AppendixA Web Console
Using the Web Console
Changing the Current Configuration
You can apply the changes you make using the Web Console to the current system configuration by
clicking Apply on any of the Web Console pages. When you click Apply, the Update page is displayed.
(See FigureA-1.)
TableA-1 Features, Default Settings, and Web Console Pages
Feature Default Setting Web Console Page
Management
Switch IP address, subnet mask, domain, and default gateway 0.0.0.0 Management IP
IP static route None Management IP
DNS server identification Enabled Management IP
NRP Configuration
NRP configuration information None NRP
Redundancy
Active CPU and autosynchronization characteristics Disabled Redundancy
Slot redundancy, primary/secondary configuration Disabled Redundancy
Subslot redundancy, primary/secondary configuration Disabled Redundancy
Subscriber
Set up new subscribers, list current subscribers Enabled Subscriber
Diagnostics
System monitoring Enabled Status
Security
Switch name, password, domain, and ATM address None System
System reload and core dump options None Advanced System
Configuration
SNMP contact information None SNMP Management
Trap manager 0.0.0.0 SNMP Management
Community strings public/private SNMP Management