Setup guide

A-10
Cisco 6400 Software Setup Guide
OL-1183-04
AppendixA Web Console
Basic System Configuration Page
Entering Basic Configuration Parameters
This information is usually entered once and not changed. Click Apply after entering information in the
fields, Revert to return values to the previous settings, or Save As to save the configuration. Each of the
fields is described in TableA-3.
For more information about setting your basic configuration, see Chapter2, “Basic NSP Configuration.”
Entering Advanced Configuration Parameters
Access the advanced configuration parameters by clicking the Advanced button on the System
Configuration page. The Advanced parameters are displayed below the basic parameters. (See
FigureA-5.)
TableA-3 System Configuration Field Descriptions
Field Description
System Name Enter a name for the Cisco 6400 system.
Mgmt ATM Address Pre-assigned ATM address is entered automatically.
Contact Name Enter a name.
Enable Password Enter the enable password for the system.
Confirm Password Reenter the enable password for the system.
Mgmt Ethernet Addr. Displays the Ethernet address for the CPU.
(Display only, use the Mgmt IP page to change the IP address.)
Domain Name Displays the domain name of the system.
(Display only, use the Mgmt IP page to change the domain name.)