Setup guide

A-14
Cisco 6400 Software Setup Guide
OL-1183-04
AppendixA Web Console
IP Address Management
For the CPU, you can also set the configuration synchronization option as described in the
“Synchronizing Redundant NSPs” section on page5-4.
IP Address Management
To manage the IP address used for the NME port, static IP routes, and DNS servers, use the Mgmt IP
page. (See FigureA-7.) To display this page, click Mgmt IP on the action bar.
Caution Changing the switch IP address on this page will end your Web Console session. If this occurs, you can
restart Web Console by entering the new IP address in the browser URL field.
FigureA-7 Mgmt IP Page
Setting the Management IP Configuration
The IP address of the switch is entered or changed through the Setup program or the CLI. If you change
it on this page, the new value takes effect when you click Apply and could cause you to lose contact
with the switch. When entering data in the IP Configuration fields, you can always select Revert to
return the page to its previous state. You might need to contact a network administrator to obtain the IP
address information.