Setup guide

A-16
Cisco 6400 Software Setup Guide
OL-1183-04
AppendixA Web Console
SNMP Management
Adding and Removing Domain Name Servers
A Domain Name Server (DNS) converts domain names into their corresponding IP addresses. To define
DNS servers that are used on the NME, follow these steps:
Step 1 Enter the Ethernet address of a new DNS in the New Server field.
Step 2 Click Add.
To remove a DNS, follow these steps:
Step 1 Select the DNS you want to remove from the list of current servers.
Step 2 Click Remove.
SNMP Management
Use the SNMP page (see FigureA-8) to perform the following tasks:
• Enter information about the switch (System Options)
• Enter community strings that serve as passwords for SNMP messages
• Enter trap managers and their community strings to receive traps (alerts) about switch activity
• Set the classes of traps that a trap manager receives
For more information about configuring SNMP management options, see the “Simple Network
Management Protocol” section on page6-1. Also see the “Configuring Simple Network Management
Protocol (SNMP)” chapter of the “Cisco IOS System Management” part of the Cisco IOS Configuration
Fundamentals Configuration Guide.