Setup guide

A-19

Cisco 6400 Software Setup Guide

OL-1183-04

AppendixA Web Console

NRP Status

The NRP page allows you to display information about any of the node route processors (NRPs) installed

in the Cisco 6400 chassis. To display the NRP page (FigureA-9 ), click NRP in the action bar.

FigureA-9 NRP Page

Subscriber Management

Use the Subscriber Setup page (see FigureA-10) to set and display the cross-connections for each of

your current system subscribers. Subscribers are defined according to the ingress and egress ports, the

virtual path identifier (VPI), and virtual channel identifier (VCI). To display the Subscriber page, click

Subscriber in the action bar.

In Cisco IOS Release 12.0(7)DB1, the subscriber page is split into two pages: VC Subscriber Setup (see

FigureA-11) and VP Subscriber Setup (see FigureA-12).

For more information about configuring virtual circuits for your subscribers, see the “Internal

Cross-Connections” section on page2-10.