Setup guide

A-20
Cisco 6400 Software Setup Guide
OL-1183-04
AppendixA Web Console
Subscriber Management
FigureA-10 Subscriber Setup Page
Adding and Removing Subscribers
To add new subscribers and set up the virtual circuits, follow these steps:
Step 1 Select the ATM interface into which the subscriber packets arrive at the switch.
Step 2 Enter the incoming VPI.
Step 3 Enter the incoming VCI.
Step 4 Enter the outgoing (egress) ATM interface. This is the other side of the cross-connection.
Step 5 Enter the outgoing VPI and VCI.
Step 6 Click Add.
The new subscriber information is displayed in the Current Subscriber list.