Setup guide

Index
IN-4
Cisco 6400 Software Setup Guide
OL-1183-04
framing 4-8
scrambling 4-8
overview 1-5
redundancy
and APS 5-17
full-height, configuring 5-17
half-height, configuring 5-18
reversing primary and secondary 5-23
supported types (table) 1-5
NME
consolidation 2-7to 2-9, 2-10
separate 2-9to2-10
Web Console, using A-14
NNI 4-5to 4-6
no atm auto-configuration command 4-2
node line card
See NLC
node route processor
See NRP
node switch processor
See NSP
no ip address command
NRP, NME consolidation 2-9
NRP-1, basic configuration 3-4
upgraded NSP, NME consolidation 2-7
no logging console command 2-21, 3-15
no mirror command 5-7
NRP
NRP-1 and NRP-2, differences (table) 1-4
NRP-1 to NRP-2 configuration transfer 3-20
NRP-2 and NRP-2SV, differences (footnote) 1-4
overview 1-3
PVCs
ATM interface 3-21to 3-22
ATM subinterface 3-22to3-24
PVC discovery 3-26to3-28
traffic shaping 3-28to3-29
VC classes 3-24to3-26
redundancy
configuring 5-15
erasing startup configurations 5-16
requirements 5-2
reversing primary and secondary 5-23
software upgrade
NRP-1, nonredundant B-2
NRP-1, redundant B-8
NRP-2, nonredundant B-4
recommendations B-1
Web Console status, displaying A-19
See also NRP-1 and NRP-2
NRP-1
configuration methods 3-1
DHCP 3-2
file systems 3-6
initial configuration 3-3
memory devices 3-6
NRP-2, differences (table) 1-4
NRP-2, transferring configuration to 3-20
SAR buffer management
buffer size, setting 3-5
I/O memory size, setting 3-6
overview 3-5
software release, checking 3-2
software upgrade
nonredundant B-2
redundant B-8
See also NRP
NRP-2
ATM MTU limitation 3-11to 3-13
configuration methods 3-9
configuration prerequisites 3-8
configuration register 2-21
console access 3-9
console logging 3-15
file storage 2-19
image management 2-20
MTU limitation (ATM) 3-11to3-13
NRP-1, differences (table) 1-4