Setup guide

Index
IN-6
Cisco 6400 Software Setup Guide
OL-1183-04
R
redundancy
NLC
and APS 5-17
full-height, configuring 5-17
half-height, configuring 5-18
See also APS
NRP
configuring 5-15
erasing startup configurations 5-16
NSP
erasing startup configuration 5-5
hardware backup 5-12
netbooting 5-14
overview 5-3
PCMCIA disk mirroring 5-5to5-12
software error protection 5-13
synchronizing 5-4
overview 1-5
requirements 5-2
resetting cards, slots, and subslots 5-23
reversing primary and secondary
NLC 5-23
NRP 5-23
NSP 5-23
slot requirements 5-1
Web Console, using A-13
redundancy command 5-4, 5-17, 5-18
redundancy force-failover command 5-14, 5-23
redundancy sync command 5-10
related documentation xi
Remote Monitoring
See RMON
resetting cards, slots, and subslots 5-23
RMON 6-4
S
scrambling
DS3 4-10
OC-12 4-8
OC-3 4-8
scrambling command 4-9, 4-10
show aps command
verifying APS priority requests 5-21
verifying NLC redundancy 5-18
verifying SONET APS 5-20
show atm addresses command 2-5
show atm input-xlate-table command C-6toC-8
show atm input-xlate-table inuse command
verifying autominblock C-5
verifying ITT block shrinking C-6
show atm interface command
verifying autoconfiguration 4-3
verifying IISP configuration 4-7
verifying NNI configuration 4-6
verifying UNI configuration 4-5
show atm vc command
verifying internal cross-corrections 2-12to2-14
verifying PVCs on ATM interface 3-22
show atm vc interface atm command
verifying ITT block shrinking C-6
verifying optimized VCI values C-3
verifying PVC discovery 3-28
show bootvar command
verifying NSP redundancy for hardware backup 5-12
verifying NSP redundancy for software protection 5-14
viewing system reload settings A-12
show clock command 2-4
show controller async command 3-16
show controller atm command 3-14
verifying DS3 interface 4-11
verifying OC-3 or OC-12 interfaces 4-9
verifying SONET APS 5-20
show dhcp lease command 2-3