Instruction Manual

3-7
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
Step 3
Connect a Category 3 or 5
straight-through Ethernet cable
from another network device,
such as a desktop computer, to
the access port on the
Cisco Unified IP Phone 7912G.
Optional. You can connect
another network device later
if you do not connect one
now.
See the “Network and
Access Ports” section on
page 3-5 for guidelines.
Step 4
Connect the power supply to the
Cisco DC Adapter port.
Optional. See the “Providing Power to
the Cisco Unified IP Phone”
section on page 2-9 for
guidelines.
Procedure Notes Reference