Specifications

5-9
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Hold/Resume Allows the user to move a connected call between an
active state and a held state.
Requires no configuration, unless you want to
use music on hold. See Music on hold in this
table for information.
Also see Hold Reversion in this table for
related information.
Hold Reversion Limits the amount of time that a call can be on hold before
reverting to the phone that put the call on hold and alerting
the user.
Reverting calls are distinguished from incoming calls by
a single ring (or beep, depending on the new call indicator
setting for the line). This notification repeats at intervals
if not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble and a brief message on
the status line.
You can configure call focus priority to favor incoming or
reverting calls.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, Hold Reversion.
Hold Status Enables phones with a shared line to distinguish between
the local and remote lines that placed a call on hold.
No configuration is required.
Hunt Group
Display
Provides load sharing for calls to a main directory
number. A hunt group contains a series of directory
numbers that can answer the incoming calls.
When an incoming call is offered to a directory number
that is part of the hunt group, this feature displays the
main directory number in addition to the calling party.
For more information, see:
• Cisco Unified Communications Manager
System Guide, Understanding Route
Plans.
• Cisco Unified Communications Manager
Administration Guide, CTI Route Point
Configuration.
Immediate
Divert
Allows users to transfer incoming calls directly to the
voice messaging system.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Immediate Divert.
Immediate
Divert—
Enhanced
Allows users to transfer incoming calls directly to their voice
messaging system or to the voice messaging system of the
original called party.
For more information, see the Cisco Unified
Communications Manager System Guide,
Cisco Unified IP Phones.
Intelligent
Session Control
Reroutes a direct call to a user’s mobile phone to the
enterprise number (desk phone). For an incoming call to a
remote destination (mobile phone), only the remote
destination rings; the desk phone does not ring. When the
call is answered on the mobile phone, the desk phone
displays a Remote In Use message. During these calls, a
user can use the various features of the mobile phone.
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, Cisco
Unified Mobility.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference