Specifications

5-10
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Intercom Allows users to place and receive intercom calls using
programmable phone buttons. You can configure intercom
line buttons to:
• Directly dial a specific intercom extension.
• Initiate an intercom call and then prompt the user to
enter a valid intercom number.
Note If your user logs into the same phone on a daily
basis using their Cisco Extension Mobility profile,
assign the phone button template that contains
intercom information to their profile, and assign
the phone as the default intercom device for the
intercom line.
• Cisco Unified CallManager Features and
Services Guide, Intercom.
• Cisco Unified CallManager Feature and
Services Guide, Cisco Extension Mobility.
Join Across
Lines
Allows users to apply the Join feature to calls that are on
multiple phone lines.
For more information:
• See Configuring Softkey Templates,
page 5-20
• See the Cisco Unified Communications
Manager System Guide, Cisco Unified IP
Phones
Line select If this feature is disabled (default), then the ringing line
is selected. When enabled, the primary line is picked up
even if a call is ringing on another line. The User must
manually select the other line.
Note This feature can also be enabled or disabled for
Cisco Extension Mobility.
For more information, see the option “Always
use prime line” in the following chapters of
Cisco Unified Communications Manager
Administration Guide:
• Device Profile Configuration
• Common Phone Profile Configuration
• Cisco Unified IP Phone Configuration
Line select for
voice messages
When disabled (default), pressing the Messages button
selects the line that has a voice message. If more than one
line has voice mail, then the first available line is selected.
When enabled, the primary line is always used to retrieve
voice messages.
Note This feature can also be enabled or disabled for
Extension Mobility.
For more information, see the option
“Always use prime line for voice message”
in the following chapters of Cisco Unified
Communications Manager Administration
Guide:
• Device Profile Configuration
• Common Phone Profile Configuration
• Cisco Unified IP Phone Configuration
Log out of hunt
group
Allows users to log out of a hunt group and to temporarily
block calls from ringing their phones when they are not
available to take calls. Logging out of hunt groups does
not prevent non-hunt group calls from ringing their phone.
For more information:
• See Configuring Softkey Templates,
page 5-20.
• See the Cisco Unified Communications
Manager System Guide, Understanding
Route Plans.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference