Specifications

4-8
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
SW Port
Configuration
Speed and duplex of the network port (labeled with “SW” on the
Cisco Unified IP Phone). Valid values:
• Auto Negotiate
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 1000 Full—1000-BaseT/full duplex
If the phone is connected to a switch, configure the port on the switch
to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you must change the PC Port
Configuration option to the same setting.
1. Unlock network
configuration options.
2. Scroll to the SW Port
Configuration option and
then press the Edit softkey.
3. Scroll to the setting that you
want and then press the
Select softkey.
4. Press the Save softkey.
PC Port
Configuration
Speed and duplex of the access port (labeled with “PC” on the Cisco
Unified IP Phone). Valid values:
• Auto Negotiate
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 1000 Full—1000-BaseT/full duplex
If the phone is connected to a switch, configure the port on the switch
to the same speed/duplex as the phone, or configure both to
auto-negotiate.
If you change the setting of this option, you must change the SW Port
Configuration option to the same setting.
1. Unlock network
configuration options.
2. Scroll to the PC Port
Configuration option and
then press the Edit softkey.
3. Scroll to the setting that you
want and then press the
Select softkey.
4. Press the Save softkey.
PC VLAN Allows the phone to interoperate with 3rd party switches that do not
support a voice VLAN. The Admin VLAN ID option must be set
before you can change this option.
1. Unlock network
configuration options.
2. Make sure the Admin
VLAN ID option is set.
3. Scroll to the PC VLAN
option, press the Edit
softkey, and then enter a new
PC VLAN setting.
4. Press the Validate
softkey and then press
the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change