Operation Manual

Chapter 1 Introducing Your Cisco IP Phone
Using the Handset, Speaker and Headset
1-14
Cisco IP Phone 7960G and 7940G User Guide
OL-4637-01
Figure 1-4 Using the Handset Rest
Using the Speaker
You can use the speaker in conjunction with all of the features on your
Cisco IP Phone.
• To place and answer calls using the speaker, press the Speaker button.
• To switch from speaker to handset during a call, lift the handset.
Step 1
Set the handset aside and use your thumb and finger to grasp and pull
out the square plastic tab in the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Slide the tab back into the handset rest with the extension protruding
from the top of the tab.
Replace the handset in the rest. The tab hooks into a slot in the handset
to ensure that the handset will not slip out of the rest.
1 2 3
77354