Specifications

4-26
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Media Configuration Menu
The Media Configuration menu displays whether the headset, speakerphone, and video capability (SCCP
phones only) are enabled on the phone. This menu also displays options for recording tones that the
phone may play to indicate that a call may be recorded. Table 4-15 describes the options on this menu.
Single Button Barge Indicates whether the Single Button Barge
feature is enabled for the phone.
Default: Disabled.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Enbloc Dialing
(SCCP only)
Indicates whether the phone will use Enbloc
dialing. If “Enabled”, the phone will use Enbloc
dialing when possible. If “Disabled”, the phone
will not use Enbloc dialing. You should disable
Enbloc dialing if either Forced Authorization
Codes (FAC) or Client Matter Codes (CMC)
dialing is being used.
Default: Enabled
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Table 4-14 UI Configuration Menu Options (continued)
Option Description To Change
Table 4-15 Media Configuration Menu Options
Option Description To Change
Headset Enabled Indicates whether the Headset button is enabled
on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Headset Hookswitch
Control Enabled (for
Cisco Unified IP Phone
7975G, 7965G, and
7945G)
Indicates whether the wireless headset
hookswitch feature is enabled on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Speaker Enabled Indicates whether the speakerphone is enabled
on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Video Capability
Enabled
(SCCP phones only)
Indicates whether the phone can participate in
video calls when connected to an appropriately
equipped computer.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.