Specifications

4-36
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-5
Security Configuration Menu
The Security Configuration that you access directly from the Settings menu provides information about
various security settings. It also provides access to the Trust List menu. This menu indicates if the CTL
or ITL file is installed on the phone.
For information about how to access the Security Configuration menu and its sub-menus, see Displaying
a Configuration Menu, page 4-2.
Note The phone also has a Security Configuration menu that you access from the Device menu. For
information about the security options on that menu, see Security Configuration Menu, page 4-30.
Table 4-21 describes the options in the security configuration menu.
IPv6 Load Server Used to optimize installation time for phone firmware
upgrades and offload the WAN by storing images locally,
negating the need to traverse the WAN link for each phone's
upgrade.
You can set the Load Server to another TFTP server IP address
or name (other than the IPv6 TFTP Server 1 or IPv6 TFTP
Server 2) from which the phone firmware can be retrieved for
phone upgrades. When the Load Server option is set, the
phone contacts the designated server for the firmware
upgrade.
Note The Load Server option allows you to specify an
alternate TFTP server for phone upgrades only. The
phone continues to use IPv6 TFTP Server 1 or IPv6
TFTP Server 2 to obtain configuration files. The Load
Server option does not provide management of the
process and of the files, such as file transfer,
compression, or deletion.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
IPv6 Log Server Indicates the IP address and port of the remote logging
machine to which the phone sends log messages. These log
messages help in debugging the peer to peer image
distribution feature.
Note The remote logging setting does not affect the sharing
log messages sent to the phone log.
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone > Phone
Configuration.
Table 4-20 Network Configuration Menu Options (continued)
Option Description To Change