Operation Manual

Chapter 5 Customizing Settings on Your Phone
Changing the LCD Screen Contrast
5-4
Cisco IP Phone 7960G and 7940G User Guide
OL-4637-01
Changing the LCD Screen Contrast
To improve the readability of the LCD screen, follow these steps to adjust the
contrast.
Procedure
Step 1 Press the Settings button.
Step 2 From the Settings menu, use the Navigation button to highlight Contrast and
press the Select softkey.
Step 3 Perform one of the following:
• To set the desired contrast level on your base phone—press the Up or Down
softkeys (or the Volume buttons). Press the OK softkey, then the Save softkey.
• If you have an attached Cisco IP Phone 7914 Expansion Module and want to
adjust the contrast, select Expansion Module(s) and follow the same
procedure used for your base phone.
Step 4 To restore contrast settings, from the Settings menu use the Navigation button to
highlight Contrast and perform one of the following:
• To restore your previously saved contrast setting—press the more softkey,
then the Restore softkey.
• To restore the factory default contrast setting—press the more softkey, then
the Default softkey.
Step 5 Press the Save softkey to accept and save your changes, and to exit the Settings
menu.