Operation Manual

CHAPTER

5-1

Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1

OL-14640-01

Configuring Features, Templates, Services, and

Users

After you install Cisco Unified IP Phones in your network, configure their network settings, and add

them to Cisco

Unified Communications Manager, you must use Cisco Unified Communications

Manager Administration to configure telephony features, optionally modify phone templates, set up

services, and assign users.

This chapter provides an overview of these configuration and setup procedures. Cisco Unified

Communications Manager documentation provides detailed instructions for these procedures.

For suggestions about how to provide users with information about features, and what information to

provide, see

Appendix A, “Providing Information to Users Via a Website.”

For information about setting up phones in non-English environments, see Appendix C, “Supporting

International Users.”

This chapter includes following topics:

• Telephony Features Available for the Phone, page 5-2

• Configuring Corporate and Personal Directories, page 5-14

• Modifying Phone Button Templates, page 5-15

• Configuring Softkey Templates, page 5-16

• Setting Up Services, page 5-16

• Adding Users to Cisco Unified Communications Manager, page 5-17

• Managing the User Options Web Pages, page 5-17