Operation Manual

5-11
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14640-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Presence-enabled
directories
Allows a user to monitor the call state of another directory
number (DN) listed in call logs, speed-dials, and corporate
directories. The Busy Lamp Field (BLF) for the DN
displays the call state.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide,
“Directory Number Configuration”
chapter.
Private Line Automated
Ringdown (PLAR)
(SIP phones only)
The Cisco Unified Communications Manager
administrator can configure a phone number that the Cisco
Unified
IP Phone dials as soon as the handset goes off
hook. This can be useful for phones that are designated for
calling emergency or “hotline” numbers.
Refer to Cisco
Unified
Communications Manager
System Guide, “SIP Dial Rules
Configuration” chapter.
Privacy Prevents users who share a line from adding themselves to
a call and from viewing information on their phone screens
about the call of the other user.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide “Barge and Privacy”
chapter.
Quality Reporting Tool
(QRT)
Allows users to use the QRT softkey on a phone to submit
information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.
For more information refer to:
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Quality Report Tool”
chapter.
Redial Allows users to call the most recently dialed phone number
by pressing a softkey.
Requires no configuration.
Ring setting Identifies ring type used for a line when a phone has
another active call.
For more information refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Directory Number
Configuration” chapter.
• “Creating Custom Phone Rings”
section on page 6-2.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference