Operation Manual

7-10
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14640-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Firmware Versions Screen
The Firmware Versions screen displays information about the firmware version that is running on the
phone.
Table 7-4 explains the information that is displayed on this screen.
To display the Firmware Version screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Step 3 Select Firmware Versions.
To exit the Firmware Version screen, press the Exit softkey.
One of the following values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Cause of the last reset of the phone
Elapsed Time Amount of time that has elapsed since the phone last rebooted
Port 1 Link state and connection of the PC port (for example, Auto 100 Mb
Full-Duplex
means that the PC port is in a link-up state and has
auto-negotiated a full-duplex, 100-Mbps connection)
Port 2 Link state and connection of the Network port
DHCP BOUND Phone is bound to the DHCP server, DHCP parameters are
acceptable, and the phone has received a DHCPACK message.
Table 7-3 Network Statistics Message Components (continued)
Item Description