Operation Manual

4-18
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14640-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Media Configuration Menu
The Media Configuration menu displays whether the headset, speakerphone, and video capability are
enabled on the phone. This menu also displays options for recording tones that the phone may play to
indicate that a call may be recorded.
Table 4-12 describes the options on this menu.
Wideband Headset UI
Control
Indicates whether the user can configure the
Wideband Headset option in the phone user
interface.
Val u e s:
• Enabled—The user can configure the
Wideband Headset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
• Disabled—The value of the Wideband
Headset option in Cisco Unified
Communications Manager Administration
gets used (see
Media Configuration Menu,
page 4-18).
Default: Enabled
Use Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
Personalization Indicates whether the user can configure
ringtones and wallpaper images.
Default: Enabled
From Cisco Unified Communications Manager
Administration, choose Device> Phone> Phone
Configuration.
Table 4-11 UI Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-12 Media Configuration Menu Options
Option Description To Change
Headset Enabled Indicates whether the Headset button is enabled
on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Speaker Enabled Indicates whether the speakerphone is enabled
on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Video Capability
Enabled
Indicates whether the phone can participate in
video calls when connected to an appropriately
equipped computer.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.