Operation Manual

4-33
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14640-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Table 4-22 describes 802.1X Authentication Real-Time Status.
Ta b l e 4-22 802.1X Authentication Real-Time Status
Option Description To Change
802.1X Authentication
Status
Real-time progress of the 802.1X
authentication status, displaying one of
the following states:
• Disabled—802.1X is disabled and
transaction was not attempted
• Disconnected—Physical link is
down or disconnected
• Connecting—Trying to discover or
acquire the authenticator
• Acquired—Authenticator
acquired, awaiting authentication
to begin
• Authenticating—Authentication in
progress
• Authenticated—Authentication
successful or implicit
authentication due to timeouts
• Held—Authentication failed,
waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.