Quick Start Guide Cisco 805 Series Router Cabling and Setup 1 Cisco One-Year Limited Hardware Warranty Terms 2 Overview 3 Parts List 4 Verify the PC Setup 5 Connect the Cisco 800 Series Router to a PC 6 Connect the Cisco 800 Series Router to a Hub 7 Connect the Cisco 805 Router to a Serial Drive 8 Connect the Power and Turn On the Router 9 Verifying the LEDs 10 Obtaining Documentation 11 Documentation Feedback 12 Cisco Product Security Overview 13 Obtaining Technical Assistance 14 Obtaini
1 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com. 1. Launch your browser, and go to this URL: http://www.cisco.
Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number 2 Overview This document describes the basic process of cabling and configuring the Internet access device, the Cisco 805 router. For advanced cabling information, refer to the Cisco 805 Router Hardware Installation Guide. For advanced configuration information, refer to the Cisco 805 Router Software Configuration Guide.
5 Connect the Cisco 800 Series Router to a PC Follow these steps to connect the Cisco 805 router to a PC with a 10- or 10/100 Mbps network interface card (NIC): Figure 1 Connecting a Cisco 805 Router to a PC HUB LINK NO HUB ETHE RNET CONS OLE 10 BA SE T Cisco 805 SERIAL OK SER 0 AUX LAN AUX Cisco 805 Router PC Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the Ethernet port on the NIC on the computer.
6 Connect the Cisco 800 Series Router to a Hub Follow these steps to connect the Cisco 805 router to a hub: Figure 2 Connecting a Cisco 805 Router to a Hub HUB LINK NO HUB ETHE RNET CONS 10 BA SE OLE T Cisco 805 SERIAL Cisco 805 Router 1X 2X SPEED LED 100Bas eTX SO LID 10Base T BLI NK 10/100 3X 4X 1 2 3 4 5 6 7 8 5X 6X 7X 8X MDI MDI-X Cisco 1528 Micro Hub 10/100 Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the Ethernet port on
If you need help deciding which serial cable to order, see Appendix A, “Selecting a Serial Cable” in the Cisco 805 Router Hardware Installation Guide. Then order one of the serial cables described in the following table.
8 Connect the Power and Turn On the Router Follow these steps to connect power to the Cisco 805 router and turn it on: Figure 4 Connecting the Power to a Cisco 805 Router To electrical outlet HUB LINK NO HUB ETHE RNET CONS 10 BA SE OLE Cisco 805 T SERIAL 6-pin connector Desktop power supply Step 1 Make sure the router power is off. Step 2 Set the power switch to the STANDBY ( Step 3 Connect the power supply cable to the 6-pin connector on the router.
9 Verifying the LEDs Verify the power, Ethernet, and serial connections by checking the LEDs. Figure 5 shows the components that you must verify and the location of their corresponding LEDs. Figure 5 Components and Associated LEDs CD LED OK LED Front panel Back panel LINK Ethernet LED port Serial port Power connector and switch The following table describes the normal pattern for these LEDs and what to do if you get an abnormal pattern.
10 Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.
12 Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html From this site, you can perform these tasks: • Report security vulnerabilities in Cisco products. • Obtain assistance with security incidents that involve Cisco products. • Register to receive security information from Cisco.
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs.
• Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.cisco.com Tel: 31 0 20 357 1000 Fax: 31 0 20 357 1100 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.