Datasheet

ManualsBrandsCisco ManualsNetworkingAIR-ACCMFM1400=

Data Sheet

Cisco Aironet 2.4 GHz and 5 GHz Antennas and

Accessories—Complete the Wireless Solution

Cisco Systems

offers a complete range of antennas for access point and bridge

equipment that enable a customized wireless solution for almost any installation.

Cisco Aironet Antennas and Accessories

Every wireless LAN deployment is different. When engineering an in-building solution, varying

facility sizes, construction materials, and interior divisions raise transmission and multipath

considerations. When implementing a building-to-building solution, distance, physical obstructions

between facilities, and number of transmission points must be taken into account.

Cisco is committed to providing the best access points, client adapters, and bridges in the

industry—and is also committed to providing a complete solution for any wireless LAN deployment.

Cisco has the widest range of antennas, cable, and accessories available from any wireless

manufacturer.

Cisco offers a complete range of 2.4 GHz and 5 GHz antennas for access point and bridge

equipment that enable a customized wireless solution for almost any installation.

With the Cisco FCC-approved directional and omnidirectional antennas, low-loss cable, mounting

hardware, and other accessories, installers can customize a wireless solution that meets the

requirements of even the most challenging applications.

Access Point Antennas

Cisco Aironet 2.4-GHz access point antennas are compatible with all Cisco RP-TNC-equipped

access points. The antennas are available with different gain and range capabilities, beam widths,

and form factors. Coupling the appropriate antenna and access point allows for efficient coverage

in any facility, as well as better reliability at higher data rates (Table 1).

Cisco Aironet 5 GHz access point antennas have RP-TNC connectors and are compatible with

Cisco Aironet 1200 Series and 1230AG Series access points when equipped with a RM22A radio

module. Selection of the appropriate antenna should provide optimal coverage for the desired

application in the 5 GHz frequency band (Table 2).

The Cisco Aironet 1250 Series Access Points feature multiple-input and multiple-output (MIMO)

technology. These access points have 6 connectors or 3 connectors for 2.4 GHz and 3 connectors

for 5 GHz. Cisco has developed antennas specifically for use with the Cisco Aironet 1250 Series

Access Points but most existing antennas can also be used (Table 4).

Summary of content (13 pages)

PAGE 1
Data Sheet Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories—Complete the Wireless Solution ® Cisco Systems offers a complete range of antennas for access point and bridge equipment that enable a customized wireless solution for almost any installation. Cisco Aironet Antennas and Accessories Every wireless LAN deployment is different. When engineering an in-building solution, varying facility sizes, construction materials, and interior divisions raise transmission and multipath considerations.
PAGE 2
Data Sheet Table 1. Cisco Aironet 2.
PAGE 3
Data Sheet Feature AIR-ANT1728 AIR-ANT4941 AIR-ANT2422DG-R** Beam Width 360°H, 36°V Cable Length 3 ft (0.91 m) None None None Dimensions Length: 11.25 in. (28.5 cm) 5.5 in. (14 cm) 3.9 in (9.9 cm) 5.5 in. (14 cm) 1.1 oz (31 g) 1.1 oz (31 g) 1.1 oz (31 g) 360°H, 65°V 360°H, 65°V AIR-ANT2422DW-R 360°H, 65°V Diameter: 1 in. (2.5 cm) Weight 4.6 oz (0.
PAGE 4
Data Sheet Feature AIR-ANT5135D-R AIR-ANT5135DG-R**** AIR-ANT5135DW-R Application Indoor omnidirectional coverage Indoor omnidirectional Indoor omnidirectional coverage Gain 3.5 dBi 3.5 dBi 3.5 dBi Frequency*** 5 GHz 5 GHz 5 GHz Approximate Indoor Range at 6 Mbps* 675 ft (206 m) 675 ft (206 m) 675 ft (206 m) Approximate Indoor Range at 54 Mbps* 75 ft (21 m) 75 ft (21 m) 75 ft (21 m) Beam Width 360°H, 40°E Cable Length None None None Dimensions 5.3 x 0.6 in. 3.61 x .06 in 5.
PAGE 5
Data Sheet Feature AIR-ANT2451V-R= Dimensions 8.5 in. x 6 in. x .93 in (21.5 cm x 15.2 cm x 2.4cm) Weight 1 lb (4.5 kg) Operating Temperature 0° to +55°C *5 GHz antennas are denoted by either a blue dot on the radome or blue marker on the cable near the connector. ** All range estimations are based on an external antenna associating with an integrated Intel Centrino client adapter under ideal conditions.
PAGE 6
Data Sheet Feature AIR-ANT2451V-R= AIR-ANT5145V-R AIR-ANT5160V-R AIR-ANT5170P-R AIR-ANT5195P-R Description Duall band: 2 dBi in 2.4 GHz and 3dBi in 5 GHz omnidirectional ceiling mount 4.
PAGE 7
Data Sheet Table 5. Cisco Aironet 2.
PAGE 8
Data Sheet Feature AIR-ANT58G9VOA-N Polarization Vertical AIR-ANT58G10SSA-N AIR-ANT58G28SDA-N Vertical or horizontal Vertical or horizontal Field configurable Field configurable Elevation Adjustment None None +/– 12.5 degrees Approximate Range at 9 Mbps* 8 miles (13 km) 8 miles (13 km) 23 miles (37 km) (with 22.5 dBi captive antenna on the remote site) (with 22.
PAGE 9
Data Sheet * Cisco Aironet 1500 Series Access Points are available in single-band (2.4 GHz) and dual-band (2.4 GHz and 5 GHz) versions. Check your access point for proper antenna selection before placing an order Feature AIR-ANT5175V-N AIR-ANT5180V-N AIR-ANT5114P-N AIR-ANT5117S-N Description 7.
PAGE 10
Data Sheet Low-Loss/Ultra-Low-Loss Cables Low-loss cables extend the length between any Cisco Aironet 2.4 GHz and 5 GHz radio and the antenna with RP-TNC connectors. With a loss of 6.7 dB per 100 feet (30 m) for the low-loss cable and 4.4 dB for the ultra-low-loss cable, this provides installation flexibility without a significant sacrifice in range (Table 8). Table 8. Cisco Aironet Low-Loss Antenna Cable Features Cisco Part Number Type of Cable Description Loss at 2.4 GHz Loss at 5.
PAGE 11
Data Sheet Table 9. Cisco Aironet Accessory Features Feature AIR-ACC2537-060 AIR-ACC245LA-R AIR-ACC2662 Description 60 in. (152 cm) bulkhead extender 2.4 GHz and 5 GHz lightning arrestor Mount to provide articulation of Yagi and AIR-ANT5195 antennas Application Flexible antenna cable that extends access point cabling, typically within an enclosure Supports both 2.
PAGE 12
Data Sheet Table 11. Cisco Aironet 1400 Series Bridge Accessory Features Feature AIR-ACCRWM1400 AIR-ACCBRGB= AIR-ACCMFM1400= Description Roof/Wall mount kit Grounding block Multifunction mount Application Allows mounting to flat surfaces Helps prevent damage due to lightning-induced surges or static electricity Allows mounting to poles with a diameter between 1.5 in. and 2.5 in.
PAGE 13
Data Sheet Cisco Aironet 1500 Series Accessories In addition to the antennas offered by Cisco for the 1500 Series, there are various accessories that are available (Table 13). Table 13. Cisco Aironet 1500 Series Accessories Product Number Product Description AIR-ACCPMK1500= Pole Mount Kit AIR-PWR-ST-LT-TAP= Streetlight Power Tap, 105-260 VAC AIR-PWRINJ1500= Power Injector, In 100–240VAC, Out 48 VDC AIR-ETH1500-150= Outdoor Ethernet Cable, 150 ft. AIR-LAP1510KITP-A Pole-Top Kit, 2.