Datasheet

Reference Guide
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 63
Cisco Part Number Antenna Type Description Gain
AIR-ANT5135DG-R Omnidirectional Indoor-only gray, non-articulating dipole like
omnidirectional antenna for 5 GHz. Use with any radio
with 5 GHz connectors.
3.5 dBi
AIR-ANT5145V-R Diversity
Omnidirectional
Indoor-only diversity omnidirectional 5 GHz antenna for
use with the 1200 Series and the 802.11a module (AIR-
RM22A).
4.5 dBi
Integrated RM21A
Antenna
Omnidirectional/
Patch
This articulating antenna is a dual function, diversity omni
or patch antenna. It is permanently attached to the RM-
21A 5 GHz Cardbus radio module used with the 1200
Series access point and operates between 5150–5825
MHz. When folded flat to the AP housing, it is in a 9 dBi
patch mode, and when moved to any other position, it
switches to a 5 dBi omni mode. In both cases it provides
diversity antenna performance.
5 dBi/9 dBi
AIR-ANT5160V-R Omnidirectional Indoor or outdoor use omnidirectional 5 GHz antenna for
use with the 1200 Series and the 802.11a module (AIR-
RM22A). Can be mast or ceiling mounted.
6 dBi
AIR-ANT5170P-R Diversity Patch Wall Mount diversity patch antenna with RP-TNC
Connectors—Designed for use in both indoor and outdoor
applications. It comes with wall mount hardware, and has
a gain of 7 dBi. It has a plenum rated pigtail cable of 36”.
7 dBi
AIR-ANT5195P-R Patch Wall or Mast Mount Patch Antenna—Designed for use
indoor or outdoors, this antenna comes with a wall mount
and a plate that adapts to articulating mounting hardware
(AIR-ACC2662), which is sold separately. It has a plenum
rated pigtail cable of 36 in.
9.5 dBi
Table 8. Dual Band Antennas for 2.4 and 5 GHz Access Points with RP-TNC Connectors
Cisco Part Number Antenna Type Description Gain
AIR-ANT2451V-R= Omnidirectional Ceiling Mount Omni-directional Antenna—Designed for use
indoor, this antenna comes with ceiling mount hardware. It
has 4 plenum rated pigtail cables, 18 inches each, with 4
right angle RP-TNC connectors.
2.4 GHz: 2 dBi
5 GHz: 3 dBi
Table 9. 2.4 GHz and 5 Ghz Access Point and Bridge Antennas with N Type Connectors
Cisco Part Number Antenna Type Description Gain
AIR-ANT2450V-N Omnidirectional 2.4 GHz, 5 dBi omnidirectional antenna for mesh access
points. Suitable for use on Cisco Aironet 1520 Series
Mesh Access Points in all deployments including cable
strand mounting situations. It mounts directily to the
access point and has no cable attachments.
5 dBi
AIR-ANT2455V-N Omnidirectional A 5.5 dBi antenna for use in the 2400-2484 MHz
frequency band which utilizes a N-type connector. This
antenna directly mounts onto the unit, and has no cable
attachments.
5.5 dBi
AIR-ANT5175V-N Omnidirectional A 7.5 dBi antenna which supports 4900-5825 MHz. It
has a 12” pigtail cable and a N-type connector.
7.5 dBi
AIR-ANT2480V-N Omnidirectional 2.4 GHz, 8 dBi omnidirectional antenna for use in the
2400 - 2484 MHz frequency band which utilizes an N-
type connector. It mounts directly to the access point
and has no cable attachments
8 dBi
AIR-ANT5180V-N Omnidirectional 5 GHz, 8 dBi direct mount omnidirectional antenna for
mesh APs. Suitable for use on AP1520 series mesh
APs in all deployments. Not suitable for use on AP1505
and AP1510 series mesh APs.
8 dBi
AIR-ANT58G9VOA-N Omnidirectional An omnidirectional antenna, for use with the Cisco
Aironet 1400 Series Wireless Bridge. This non-diversity,
vertically polarized antenna operates in the UNII-3 band
(5725 to 5825 MHz). The antenna is designed to be
mast mounted in an outdoor environment. The antenna
is not compatible with other Cisco Aironet radio products
operating in the 5 GHz frequency band.
9 dBi
AIR-ANT58G10SSA-N Sector A sector antenna for use with the Cisco Aironet 1400
Series Wireless Bridge. This non-diversity symmetric
antenna operates in the UNII-3 band (5725–5825 MHz).
The antenna is designed to be mounted outdoors on a
9.5 dBi