Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 9
Item
Specification
Input power
requirements
●
AP2700: 44 to 57 VDC
●
Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
●
AP2700: 15W
Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing
equipment will be higher by some amount dependent on the length of the interconnecting cable.
Powering options
●
802.3at PoE+
●
Enhanced PoE
●
Cisco AP2700 power injectors (AIR-PWRINJ4=)
●
Cisco AP2700 local power supply (AIR-PWR-B=)
Note: If 802.3af PoE is the source of power, the access point will dynamically shift from 3x4 to 3x3 and come up
under PoE.
Warranty
Limited lifetime hardware warranty
Compliance
standards
◦ UL 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ UL 2043
◦ IEC 60950-1
◦ EN 60950-1
◦ EN 50155
●
Radio approvals:
◦ FCC Part 15.247, 15.407
◦ RSS-210 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 66 (Japan)
◦ ARIB-STD T71 (Japan)
◦ EMI and susceptibility (Class B)
◦ FCC Part 15.107 and 15.109
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ EN 301.489-1 and -17 (Europe)
◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
●
IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦ IEEE 802.11ac Draft 5
●
Security:
◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦ 802.1X
◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
●
Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦ EAP-Flexible Authentication via Secure Tunneling (FAST)
◦ PEAP v1 or EAP-Generic Token Card (GTC)
◦ EAP-Subscriber Identity Module (SIM)
●
Multimedia:
◦ Wi-Fi Multimedia (WMM)
●
Other:
◦ FCC Bulletin OET-65C
◦ RSS-102
Limited Lifetime Hardware Warranty
The Cisco Aironet 2700 Series Access Points come with a limited lifetime warranty that provides full warranty
coverage of the hardware for as long as the original end user continues to own or use the product. The warranty
includes 10-day advance hardware replacement and ensures that software media are defect-free for 90 days. For
more details, visit http://www.cisco.com/go/warranty.