Datasheet

ManualsBrandsCisco ManualsNetworkingAIR-BR1310G-A-K9

Ordering Guide

Cisco Aironet 1300 Series Outdoor Access Point or Bridge

The Cisco

Aironet

1300 Series Outdoor Access Point or Bridge is available with the following choices:

●

Operating autonomously or with a Cisco wireless LAN controller as part of a unified architecture

●

With a 13-dBi integrated antenna or with RP-TNC connectors for an externally attached antenna

●

For the FCC, ETSI, or TELEC regulatory domains

Twelve versions are available for different combinations of these options:

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, FCC config

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, ETSI config

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, TELEC config

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, FCC config

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, ETSI config

●

Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, TELEC config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, FCC config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, ETSI config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, TELEC config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, FCC config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, ETSI config

●

Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, TELEC config

A Cisco Aironet 1300 Series device operating autonomously is an intelligent access point or bridge, capable of functioning as a standalone

device. As an LWAPP access point, the Cisco Aironet 1300 Series works along with the Cisco wireless LAN controller to enable

centralized configuration and management, application of security policies, and seamless mobility. When operating with wireless LAN

controllers, Cisco Aironet 1300 Series Outdoor Access Points/Bridges function only as access points and are not capable of bridging.

The integrated antenna versions feature a radio and high-gain patch antenna for user installations of either point-to-point links or non-root

nodes of point-to-multipoint networks. The connectorized versions provide professional installers with RP-TNC type connectors that allow

the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for longer links. In all cases, the mounting kit must be

ordered separately.

All parts, along with accessories such as the Roof Mount Kit, Wall Mount Kit, cable, antennas, and power supplies, are available on the

Cisco Systems

global and wholesale price lists.

Summary of content (4 pages)

PAGE 1
Ordering Guide Cisco Aironet 1300 Series Outdoor Access Point or Bridge The Cisco® Aironet® 1300 Series Outdoor Access Point or Bridge is available with the following choices: ● Operating autonomously or with a Cisco wireless LAN controller as part of a unified architecture ● With a 13-dBi integrated antenna or with RP-TNC connectors for an externally attached antenna ● For the FCC, ETSI, or TELEC regulatory domains Twelve versions are available for different combinations of these options: ● Cisco
PAGE 2
CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH 13-DBI INTEGRATED ANTENNA The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure (Table 1). Table 1.
PAGE 3
Product Number Product Description AIR-LAP1310G-A-K9R (FCC regulatory domain) Cisco Aironet 1300 Series Outdoor Access Point with RP-TNC type connector ● Cisco Lightweight Access Point Protocol AIR-LAP1310G-E-K9R (EMEA regulatory domain) AIR-LAP1310G-J-K9R (TELEC regulatory domain) ● Ships with: ◦ Power cord (configurable) ◦ 100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector ◦ 48 VDC power injector (AIR-PWRINJ-BLR2=) ◦ 1-ft dual RG-6 cable assembly (Ethernet uplink f
PAGE 4
ANTENNAS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH RP-TNC TYPE CONNECTORS The Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connectors is certified to operate with the complete range of Cisco 2.4-GHz antennas listed in Table 4. Note that some high-gain antennas are applicable only for the Cisco Aironet 1300 Series operating as a bridge.