Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
Item
Specification
Cisco SMARTnet
®
Service for the Cisco Aironet 1600 Series Access Point with internal and external antennas
CON-SNT-C1602Ix - SMARTnet 8x5xNBD 1600i access point (dual-band 802.11 a/g/n, Controller-based),
(e.g. CON-SNT-C1602IE for AP1600 internal antenna for E Domain, Controller based)
CON-SNT-C1602Ex - SMARTnet 8x5xNBD 1600e access point (dual-band 802.11 a/g/n, Controller-based),
(e.g. CON-SNT-C1602EA for AP1600 external antenna for A Domain, Controller based)
CON-SNT-S1602Ix - SMARTnet 8x5xNBD 1600i access point (dual-band 802.11 a/g/n, Stand-alone),
(e.g. CON-SNT-S1602IE for AP1600 internal antenna for E Domain, stand-alone)
CON-SNT-S1602Ex - SMARTnet 8x5xNBD 1600e access point (dual-band 802.11 a/g/n, Stand-alone),
(e.g. CON-SNT-S1602EA for AP1600 external antenna for A Domain, Stand-alone)
Cisco Wireless LAN Services
AS-WLAN-CNSLT Cisco Wireless LAN Network Planning and Design Service
AS-WLAN-CNSLT Cisco Wireless LAN 802.11n Migration Service
AS-WLAN-CNSLT Cisco Wireless LAN Performance and Security Assessment Service
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify
the regulatory domain that corresponds to a particular country, please visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Software
Cisco Unified Wireless Network Software (available in Q4CY12)
Cisco IOS
®
Software Release (available in Q4CY12)
802.11n
3 x 3 multiple-input multiple-output (MIMO) with two spatial streams
Maximal ratio combining (MRC)
20- and 40-MHz channels
PHY data rates up to 300 Mbps
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS) (Bin 5)
Cyclic shift diversity (CSD) support
Data Rates
Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz
1
and 5 GHz):
MCS Index
2
GI = 400ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
1
2.4 GHz: 2 GHz does not support 40 MHz.
2
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the
coding rate, and data rate values.
3
GI: A Guard Interval (GI) between symbols helps receivers overcome the effects of multipath delays.