Specifications

Appendix B Parameters and Defaults
Operating Parameters
B-8
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
CallerIdMethod Integer CallerID/DTMFMethod. Possible
values are:
bit 0-1 (mask 0x3): method;
0=Bellcore, 1=DTMF, 2=ETSI, 3=FSK
(0)
bit 2 (mask 0x4): method type; 0=type
1, 1=type 2 (0)
if(method=0) {
bit 3-8 (mask 0x1f8): max no. of digits
(12)
bit 9-14 (mask 0x7e00): max no. of
chars (15)
bit 15-20 (mask 0x1f8000): special
chars (3)
}
else {
bit 3-6 (mask 0x78): start digit (12)
bit 7-10 (mask 0x780): end digit (14)
bit 11 (mask 0x800): polarity reversal
(1)
bit 12-16 (mask 0x1f000): max no. of
digits (15)
}
– Sweden=0x0ff61
– Denmark=0x0fde1
– USA=0x19e60
316 0x00019e60
Table B-3 Common Operating Parameters and Defaults (continued)
Parameter
Value
Type Description
IVR Access
Code Default