Specifications

Appendix B Parameters and Defaults
Operating Parameters
B-10
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
ConnectMode Bitmap Connection mode of the protocol used.
Possible values are:
• bit 0 (mask 0x1): 0 for slow start
and 1 for fast start (h323).
• bit 1 (mask 0x2): 1 use h245
tunneling.
• bit 3 (mask 0x8): 1 means alternate
gatekeeper need register.
• bit 12-8 (mask 0x1f00): offset to
payload 96 (0-23).
• bit 13 (mask 0x2000): 0 use
G.711ulaw; 1 use G.711alaw.
• bit 14 (mask 0x4000): 0 use fax
pass through and 1 use codec
negotiation in sending fax.
• bit 15 (mask 0x8000): 0 means
enable/1 means disable detecting
fax pass through.
• bit 16 (mask 0x10000): 1 enables
SIP to remove the registration
before adding a new one.
• bit 17 (mask 0x20000): 1 enables
SIP call forwarding to be
performed by the Cisco ATA 186.
• bit 18 (mask 0x40000): 1 enables
SIP call return performed by the
Cisco ATA 186.
311 0x00060000
Table B-3 Common Operating Parameters and Defaults (continued)
Parameter
Value
Type Description
IVR Access
Code Default