Specifications

Appendix A Voice Menu Options
A-6
Cisco ATA 186 Installation and Configuration Guide
OL-1267-01
13 UID 1 Enter the User ID (telephone number) for the
Phone 2 port.
14 PWD 1 Enter the password associated with the second
gatekeeper account.
20 Dynamic Host Configuration
Protocol (DHCP)
0=Disable
1=Enable (Default)
This command controls whether the
Cisco ATA 186 can automatically obtain
configuration parameters from a server over the
network.
21 Review IP Address Listen to the IP address.
22 Review Network Route IP
Address
Listen to the IP address of the network route.
23 Review Subnet Mask Listen to the subnet mask.
24 Review MAC Address Listen to the media access control (MAC)
address.
35 Num Tx Frames
Values: 1 through 12.
Default=2
Select the number of frames per packet to be
transmitted when using the audio codec G.723.1
or G.729A.
36 Rx Codec
0=G.723.1 (default)
1=G.711A
2=G.711µ
3=G.729A
Select the audio codec type to use to decode
received data. The call-receiving station
automatically adjusts to the call-initiating
station's audio codec type if the call-receiving
station supports that audio codec.
37 Tx Codec
0=G.723.1 (default)
1=G.711A
2=G.711µ
3=G.729A
Select the audio codec type to use to encode data
for transmission. The audio codec type for
receiving does not have to be the same as the
audio codec type for transmitting.
Table A-2 Voice Menu Options in Numerical Order
Item Number Option Description