User`s guide

Cisco ATA 186 Configuration Guide
• For example, the image below displays the Cisco ATA 186
Web interface for a device that is configured for use in China
(country code 86).
Local Dialing Configuration
TIP: The | is the secondary character on the backslash (\)
key (above the Enter key). Press and hold the Shift key and
then press the backslash (\) key to enter the | character.
4. Click the Apply button to save the setting.
You can now dial as you would on a regular telephone.
NOTE: Note that the entry is case sensitive and the | after
the entry is necessary. The hash mark character (|) is
usually found as the secondary character on the backslash
key above the Enter key on the keyboard.
Configuring the Account/PIN Prompter
When the Account/PIN prompter feature is enabled and the phone connected
to the Cisco ATA 186 goes off-hook, the device will prompt users for their
preferred language, Net2Phone account and PIN, and the number they wish
to call.
NOTE: The local dialing feature cannot be used together
with the account/PIN prompter.
Page 16