User`s guide

Cisco ATA 186 Configuration Guide
To configure the account/PIN prompter feature:
1. Connect to the Web Configuration page (see Configuring Account
Settings in the Automatic Configuration via Web Configuration
Page section on page 11 in this Guide).
2. If the DialPlan field is configured for local dialing, delete the
“Pn011xxx” text from the field, but do not delete any other text in the
field. The account/PIN prompter will not function if the local dialing
text remains in the DialPlan field.
3. In the DialPlan field, click in the text box to insert the cursor before
the default characters, but DO NOT erase the contents of the field.
4. Insert the following characters BEFORE the default characters:
H09999|.
NOTE: This entry is case sensitive, so be sure to enter a
capital “H.”
• For example, if the default characters of the DialPlan field
were “abcdefghijklmno,” the field should look like this:
H09999|abcdefghijklmno.
• For example, the image below displays the Cisco ATA 186
Web interface for a device that is configured to use the
account/PIN prompter.
Account/PIN Prompter Configuration
SUPPORTED LANGUAGES AND CURRENCY
The account/PIN prompter feature supports the languages and currencies
displayed below.
LANGUAGES
 English
 Spanish
 Chinese (Mandarin)
 Arabic
 Portuguese
 Russian
 Polish
 Czech
 Vietnamese
Page 17