Specifications

8-13
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
Chapter 8 Troubleshooting
DHCP Status HTML Page
DHCP Status HTML Page
You can use the following command to check the status DHCP-related information:
http://ipaddress/stats/
where ipaddress is the IP address of the Cisco ATA .
The information you receive includes the following:
• Elapsed time since most recent renewal of Cisco ATA IP address.
• Elapsed time since most recent successful Cisco ATA registration.
• IP address of the proxy to which the Cisco ATA is registered.
Real-Time Transport Protocol (RTP) Statistics Reporting
To monitor the quality of service for the media stream, you can access RTP packet statistics of the two
voice ports and their channels by opening the following page on the Cisco
ATA Web serve r:
<Cisco ATA IP address>/rtps
The following RTP packet statistics are reported:
• rxDuration—the number of seconds since the beginning of reception
• rxPktCnt—the total number of RTP packets received
• rxOctet—the total number of RTP payload octets received (not including RTP header)
• latePktCnt—the total number of late RTP packets received
• totalLostPktCnt—the total number of lost RTP packets received (not including late RTP packets)
• avgJitter—an estimate of statistical variance of the RTP packet inter-arrival time, measured in
timestamp unit. (Calculation is based on the formula in RFC1889.)
• txDuration—the number of seconds since the beginning of transmission
Ta b l e 8-5 Web Configuration Menu Example Network Status
Bit Number Description Boolean Value
0 Cisco ATA sent request for configuration file, ata<macaddress>, to
TFTP server
True
1 Cisco ATA sent request for configuration file, atadefault.cfg, to
TFTP server
False
4 Cisco ATA sent request for image file to TFTP server True
5 Cisco ATA failed to upgrade to the downloaded image file False
8 Configuration file is not found False
9 Bad configuration file False
10 Checksum error for configuration file False
11 Decode error for configuration file (encryption related) False
12 Configuration file is processed successfully True