Specifications

A-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
Appendix A How to Use Pre-call and Mid-call Services
Procedures for Using Pre-call Services
Access Voicemail
To access your voice-mail box, press the first digit in your pre-call service access code (* by default)
then press 0 on your telephone keypad. To change the first digit of your pre-call service access code, see
the
“Change Your Pre-Call Service Access Code” section on page A-2.
Change Your Pre-Call Service Access Code
You can use the default asterisk key (*) or the pound key (#) as the first digit in your pre-call service
access code. To change this setting, use Bit 25 of the ConnectMode parameter (see the
“ConnectMode”
section on page 5-21).
Activate Call-Forward-All
Use this feature to send all calls from one telephone number to another telephone number. To activate
Call-Forward-All, follow these steps:
Procedure
Step 1 Press ** then 1 on your telephone keypad. You will receive a confirmation tone.
Step 2 Enter the telephone number to which you want to send the calls. A confirmation tone will sound.
Step 3 Hang up.
Cancel Call-Forward-All
To cancel Call-Forward-All, follow these steps:
Procedure
Step 1 Press ** then 2 on your telephone keypad. You will receive a confirmation tone.
Step 2 Hang up.
Redial
Use this feature to call the last number dialed. To activate Redial, press * then # on your telephone
keypad.