Specifications

5-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SCCP (version 3.0)
OL-4652-01
Chapter 5 Parameters and Defaults
Configuration Text File Template
– IP address (e.g. 192.168.2.170)
– Integer (32-bit integer)
– Numeric digit string
Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the
Cisco
ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly
stated.
Note This section contains recommended values for the United States and other countries as configuration
examples for certain parameters. For detailed recommendations of tone-parameter values by country, see
Appendix E, “Recommended Cisco ATA Tone Parameter Values by Country.”
Configuration Text File Template
This is a listing of the sk_example.txt text file, without its annotations, that comes bundled with the
Cisco
ATA softwa r e .
You can make a copy of this file and use it as a template for creating your own default configuration file
or Cisco
ATA-specific configuration file. For instructions on how to create these configuration files, see
the
“Creating a Cisco ATA Default Configuration File” section on page 3-9 and the “Creating a
Configuration File for a Specific Cisco ATA” section on page 3-11.
The sk_example.txt file contains all the Cisco ATA default values. The sections that follow this listing
describe all the parameters in this file.
#txt
UIPassword:0
UseTftp:1
TftpURL:0
EncryptKey:0
upgradecode:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
upgradelang:0,0x301,0x0400,0x0200,0.0.0.0,69,0,none
Dhcp:1
StaticIp:0
StaticRoute:0
StaticNetMask:0
DNS1IP:0.0.0.0
DNS2IP:0.0.0.0
VLANSetting:0x0000002b
CA0orCM0:0
CA1orCM1:0
CA0UID:0
CA1UID:0
EPID0orSID0:.
EPID1orSID1:.
PrfCodec:1
LBRCodec:3
MediaPort:16384
Domain:0
AudioMode:0x00350035
NumTxFrames:2
CallerIdMethod:0x00019e60
Polarity:0
FXSInputLevel:-1