System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Getting Started with the Cisco SPA100 Series Phone Adapters
Connecting the Equipment
Cisco SPA100 Series Phone Adapters Administration Guide 10
1
Connecting the Equipment
NOTE For wall-mounting instructions, see Mounting the ATA, page 145.
STEP 1 Connect one end of the provided Ethernet cable to the INTERNET (Blue) port.
Connect the other end directly to your broadband network device.
STEP 2 Connect one end of the provided phone cable to the PHONE 1 (Gray) port.
Connect the other end to your analog phone or fax machine.
STEP 3 Connect one end of another phone cable to another analog phone or fax machine.
Connect the other end to the PHONE 2 (Gray) port.
STEP 4 SPA122 Only: Optionally, connect one end of an Ethernet network cable to the
ETHERNET (Yellow) port. Connect the other end to a device on your network, such
as a computer or an Ethernet switch.
STEP 5 Connect one end of the provided power adapter to the Power port. Connect the
other end to a power outlet.
DC 5V
POWER
Connect to a power source, by using the provided power
adapter.
Feature Description
239795
WAN