System information

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 103
4
Call Feature Settings
Field Description
Blind Attn-Xfer Enable Enables the ATA to perform an attended transfer
operation by ending the current call leg and
performing a blind transfer of the other call leg. If
this feature is disabled, the ATA performs an
attended transfer operation by referring the other
call leg to the current call leg while maintaining
both call legs. To use this feature, select yes.
Otherwise, select no. Default setting: No
MOH Server User ID or URL of the auto-answering streaming
audio server. When only a user ID is specified,
the current or outbound proxy is contacted.
Music-on-hold is disabled if the MOH Server is
not specified.
Xfer When Hangup Conf Makes the ATA perform a transfer when a
conference call has ended. Select yes or no from
the drop-down menu. Default setting: Yes
Conference Bridge URL This feature supports external conference
bridging for n-way conference calls (n>2), instead
of mixing audio locally.
To use this feature, set this parameter to that of
the server's name. For example:
[e-mail]:12345 or conf (which uses
the Proxy value as the domain)
Conference Bridge Ports Select the maximum number of conference call
participants. The range is 3 to 10. Default setting:
3