System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Viewing the Status and Statistics
System Information
Cisco SPA100 Series Phone Adapters Administration Guide 131
6
System Information
Use the Status > System Information page to view information about the ATA and
its current settings.
To open this page: Click Status on the menu bar, and then click System
Information in the navigation tree.
Field Description
Model The model number and product description.
Hardware Version The hardware version number.
Boot Version The boot firmware version number.
Firmware Version The current firmware version.
Recovery Firmware The version number of the recovery firmware.
WAN MAC Address The MAC address of the WAN interface.
Host Name The host name of the ATA.
Domain Name The domain name of the ATA.
Serial Number The serial number of the ATA.
Current Time Time that is set on the ATA.