System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 53
4
System Status
Customization Used for Remote Configuration by service
providers who deploy the ATA to their customers.
• Open: Not a Remote Configuration unit. This
ATA can be configured by using the
configuraton utility.
• Pending: This Remote Configuraton unit
has not yet connected to the server to get
its profile.
• Customized: This Remote Configuraton unit
has received its profile from the server.
Field Description
Current Time Current date and time of the system; for example,
10/3/2003 16:43:00. Set the system time by using
the Network Setup > Time Settings page.
Elapsed Time Total time elapsed since the last reboot of the
system; for example, 25 days and 18:12:36.
RTP Packets Sent Total number of RTP packets sent (including
redundant packets)
RTP Bytes Sent Total number of RTP bytes sent.
RTP Packets Recv Total number of RTP packets received (including
redundant packets)
RTP Bytes Recv Total number of RTP bytes received.
SIP Messages Sent Total number of SIP messages sent (including
retransmissions)
SIP Bytes Sent Total number of bytes of SIP messages sent
(including retransmissions)
SIP Messages Recv Total number of SIP messages received (including
retransmissions)
Field Description