System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 54
4
Line 1/Line 2 Status
SIP Bytes Recv Total number of bytes of SIP messages received
(including retransmissions)
External IP External IP address used for NAT mapping.
Field Description
Hook State The hook state of the port: On or Off.
Registration State Indicates if the line has registered with the SIP
proxy.
Last Registration At Last date and time the line was registered.
Next Registration In Number of seconds before the next registration
renewal. Indicates whether you have new voice
mail waiting.
Message Waiting States are either yes or no. The value
automatically is set to Yes when a message is
received. You also can clear or set the flag
manually from the user menu.
Mapped SIP Port Port number of the SIP port mapped by NAT.
Call Back Active Indicates whether a call back request is in
progress. Options are either yes or no.
Last Called Number The phone number that was most recently called
through this port.
Last Caller Number The originating phone number of the call that was
most recently received through this port.
Field Description