System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 62
4
General Purpose Parameters
Log Upgrade
Request Msg
Syslog message issued at the start of a firmware
upgrade attempt. Default setting: $PN $MAC --
Requesting upgrade $SCHEME://
$SERVIP:$PORT$PATH.
Log Upgrade
Success Msg
Syslog message issued after a firmware upgrade
attempt completes successfully. Default setting: $PN
$MAC -- Successful upgrade $SCHEME://
$SERVIP:$PORT$PATH -- $ERR.
Log Upgrade Failure
Msg
Syslog message issued after a failed firmware upgrade
attempt. Default setting: $PN $MAC -- Upgrade failed:
$ERR.
License Keys This field is not currently used by the SPA100 Series
ATA s .
GPP A to GPP P General purpose provisioning parameters. These
parameters can be used as variables in provisioning
and upgrade rules. They are referenced by prepending
the variable name with a ‘$’ character, such as $GPP_A.
Default setting: (empty)