System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 78
4
Distinctive Call Waiting Tone Patterns
Ring5 Cadence Cadence script for distinctive ring 5. Default setting:
1(.5/.5)
Ring6 Cadence Cadence script for distinctive ring 6. Default setting:
60(.2/.4,.2/.4,.2/4)
Ring7 Cadence Cadence script for distinctive ring 7. Default setting:
60(.4/.2,.4/.2,.4/4)
Ring8 Cadence Cadence script for distinctive ring 8. Default setting:
60(0.25/9.75)
Field Description
CWT1 Cadence Cadence script for distinctive CWT 1. Default setting:
30(.3/9.7)
CWT2 Cadence Cadence script for distinctive CWT 2. Default setting:
30(.1/.1, .1/9.7)
CWT3 Cadence Cadence script for distinctive CWT 3. Default setting:
30(.1/.1, .1/.1, .1/9.7)
CWT4 Cadence Cadence script for distinctive CWT 4. Default setting:
30(.1/.1, .3/.1, .1/9.3)
CWT5 Cadence Cadence script for distinctive CWT 5. Default setting:
1(.5/.5)
CWT6 Cadence Cadence script for distinctive CWT 6. Default setting:
30(.3/.1,.3/.1,.1/9.1)
CWT7 Cadence Cadence script for distinctive CWT 7. Default setting:
30(.3/.1,.3/.1,.1/9.1)
CWT8 Cadence Cadence script for distinctive CWT 8. Default setting:
2.3(.3/2)
Field Description