System information

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 82
4
Vertical Service Activation Codes
Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
included.
CPC Duration Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and dial tone applies if the attached
equipment is still off-hook. CPC is disabled if this value
is set to 0. Range: 0 to 1.000 second. Resolution is 0.001
second. Default setting: 0 (CPC disabled)
Field Description
Call Return Code Call Return Code This code calls the last caller. Default
setting: *69.
Call Redial Code Redials the last number called. Default setting: *07.
Blind Transfer Code Begins a blind transfer of the current call to the
extension specified after the activation code. Default
setting: *98.
Call Back Act Code Starts a callback when the last outbound call is not busy.
Default setting: *66.
Call Back Deact
Code
Cancels a callback. Default setting: *86.
Call Back Busy Act
Code
Starts a callback when the last outbound call is busy.
Default setting: *05.
Cfwd All Act Code Forwards all calls to the extension specified after the
activation code. Default setting: *72.
Cfwd All Deact Code Cancels call forwarding of all calls. Default setting: *73.
Cfwd Busy Act Code Forwards busy calls to the extension specified after the
activation code. Default setting: *90.
Cfwd Busy Deact
Code
Cancels call forwarding of busy calls. Default setting:
*91.
Field Description