System information

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 83
4
Cfwd No Ans Act
Code
Forwards no-answer calls to the extension specified
after the activation code. Default setting: *92.
Cfwd No Ans Deact
Code
Cancels call forwarding of no-answer calls. Default
setting: *93.
Cfwd Last Act Code Forwards the last inbound or outbound calls to the
extension specified after the activation code. Default
setting: *63.
Cfwd Last Deact
Code
Cancels call forwarding of the last inbound or outbound
calls. Default setting: *83.
Block Last Act Code Blocks the last inbound call. Default setting: *60.
Block Last Deact
Code
Cancels blocking of the last inbound call. Default setting:
*80.
Accept Last Act
Code
Accepts the last outbound call. It lets the call ring
through when do not disturb or call forwarding of all
calls are enabled. Default setting: *64.
Accept Last Deact
Code
Cancels the code to accept the last outbound call.
Default setting: *84.
CW Act Code Enables call waiting on all calls. Default setting: *56.
CW Deact Code Disables call waiting on all calls. Default setting: *57.
CW Per Call Act
Code
Enables call waiting for the next call. Default setting: *71.
CW Per Call Deact
Code
Disables call waiting for the next call. Default setting:
*70.
Block CID Act Code Blocks caller ID on all outbound calls. Default setting:
*67.
Block CID Deact
Code
Removes caller ID blocking on all outbound calls. Default
setting: *68.
Block CID Per Call
Act Code
Blocks caller ID on the next outbound call. Default
setting: *81.
Block CID Per Call
Deact Code
Removes caller ID blocking on the next inbound call.
Default setting: *82.
Field Description